After an EMP Event, Can A Nuclear Plant Shutdown Safely?

Nuclear Power Plant plus Sub Station

Nuclear Power Plant Plus Substation: Image Courtesy of AnRo007

How would an EMP affect our Nuclear Power Plants?

An EMP, or electromagnetic pulse, can be a potential threat to the United States and the world, that we are not prepared for. It can occur when a high-altitude nuclear weapon is detonated, or through severe space weather such as a solar flare or Coronal Mass Ejection. Even a lightening strike can produce an electromagnetic pulse, and interrupt transmission of power.

Although non-scheduled outages from power surges are usually transitory, the effect on power generation presents an unacceptable risk. The loss of supply not only cripples the end user but the generator of the power, as well. So, what happens when the transmission lines can not accept power from the producers, and how do the plants shut down under a station blackout condition? An EMP’s effect on the successful shutdown of a nuclear power plant must have consequences, so what are they?

Power Transmission and EMP

Electric Transmission Lines

Transmission Lines can carry electromagnetic pulses: Image Courtesy of Guam

An EMP is caused by a high-intensity burst of electromagnetic energy and a rapid acceleration of charged particles. Through this burst, gamma rays collide with particles to produce free electrons which produce current (E1). It is this current that would destroy electronic equipment on Earth in the event of a severe solar storm, or an EMP attack.

A nuclear weapon detonation produces three waves, E1, E2,and E3. The third pulse, E3, is most like that of a solar event; the effect on the electromagnetic distortion in the Earth’s atmosphere. These longer-duration, lower-frequency pulses can ride the transmission lines and destroy unhardened transformers. The primary effect is to magnetize the cores of transformers connecting to the transmission lines, thus destroying their ability to step down or step up the power.

Today, with utility and non-utility power producers, transmission lines are connected over long distances, and regulated separately. By connecting the transmissions lines, transport of power becomes easier, but the vulnerability of a massive shutdown becomes a higher probability. A power surge from an EMP, an oversupply of voltage that can last up to 50 microseconds, has the capability to destroy transformers, shutting down power transmission and reducing a power plant’s output to zero. With a nuclear plant, this issue can become serious.

Click to Read Page Two: Nuclear Power Plant Shutdown After an EMP

© Copyright 2012 Judy Haar, All rights Reserved. Written For: Decoded Science

Pages: 1 2 3

  • SwissArmy1984

    So nothing is resolved yet and there are 65 potential radioactive fallout sources in the US alone (there are also a bunch in eastern Canada) that could result from the EFFECTS of an EMP of human (high-altitude nuclear bomb explosion) or major solar storm origin. A simple look at a nuclear facilities map of North America means the East Coast would be done for. That’s a majority of the US’s population gone from radiation poisoning if they haven’t died from the results of societal breakdown beforehand.

    Oh, and by the way it would be easier to keep replacement equipment in fully enclosed Faraday cages (your steel boxes) than trying to protect equipment in use. Any connection through the wall of the Faraday cage could allow the passage of an EMP, no matter how fast any circuit breaker could cut the line.

  • Discipleof Jesus

    “Sensitive transmission components and electrical control systems can be encased in a metallic shield that would prevent external ”
    Do you know how hot transformers get ? lol , sister if you encase these transformers they will burn up . You would have to have a faraday cage which is open around them , the only way to harden transformers would be to have these cages